Preventative Maintenance · NC · SC · Augusta, GA
Preventative Air Compressor Maintenance
Scheduled PM for industrial air compressors. Fluid, filters, separators, coolers, dryers, and safeties - documented visits that stop breakdowns before they start and cut energy use every hour.
What PM Covers
What a Real PM Visit Includes
Fluid & Fluid Analysis
Correct compressor fluid on schedule, with analysis to catch contamination and wear before it turns into an airend.
Air, Oil & Separator
Air intake, oil, and separator elements changed on run-hour intervals, using OEM or OEM-equivalent parts.
Cooler Cleaning
Fouled coolers cause high-temp shutdowns and shorten fluid life - we clean aftercoolers and oil coolers as part of PM.
Belts, Couplings & Bearings
Inspection and adjustment of belts, couplings, and audible bearing checks - so wear is caught while it's cheap.
Drains, Dryer & Filtration
Automatic drains, refrigerated or desiccant dryer, and downstream filters checked so air quality stays where it needs to be.
Controls & Safety Checks
Pressure and temperature setpoints, safety relief valves, shutdown circuits, and controls verified and documented.
Process
How Our PM Program Works
- Step 1
Baseline Assessment
We audit your compressor, dryer, and filtration - runtime, service history, environment - and build a PM plan around it.
- Step 2
Scheduled PM Visits
Fluid, filters, separator, coolers, drains, and safeties on a run-hour schedule so nothing gets missed.
- Step 3
Written Reports
Every visit ends with a report - what we did, what we saw, and what to plan for next - so your maintenance file is clean.
- Step 4
Priority Response
PM customers go to the front of the line when something does break, and we already know your equipment.
Why It Matters
PM Pays for Itself Twice
Missed fluid and filter changes destroy airends and motors - the two most expensive things on a compressor. And every hour a dirty filter or fouled cooler runs, you pay for it on the electric bill. A documented PM plan is the cheapest insurance in your plant.
FAQ
Preventative Maintenance FAQs
+How often should an industrial air compressor be serviced?
Most rotary screws need a fluid, filter, and separator service on a run-hour schedule - typically 2,000 to 8,000 hours depending on model and duty. We build a PM plan matched to your unit, runtime, and environment.
+What is included in a preventative maintenance visit?
Fluid analysis or change, air and oil filters, separator inspection or change, cooler cleaning, drain and dryer checks, belt and coupling inspection, controls and safety verification, and a written report.
+Do you offer maintenance contracts?
Yes. Fixed-price PM agreements with priority response, so you know your maintenance budget up front and go to the front of the line when something does break.
+Will PM save us money?
Yes - two ways. It stops the expensive failures (airends, motors, coolers) that come from missed fluid and filter changes, and clean filters plus tight controls cut energy use every hour the compressor runs.
+Do you maintain every brand?
Yes. Ingersoll Rand, Atlas Copco, Sullair, Kaeser, Quincy, Gardner Denver, Champion, Chicago Pneumatic, Curtis, ELGi, and more - rotary screw and reciprocating, oil-flooded and oil-free.
Where We Work
PM Coverage Across NC, SC & Augusta, GA
Ready to Stop Reacting to Breakdowns?
Get a PM plan sized to your compressors and your runtime. Fixed-price, documented, priority response for your fleet.