Filtration · NC · SC · Augusta, GA
Compressed Air Filtration & Filter Service
Coalescing, particulate, and activated carbon filtration - specified, installed, and serviced to hit your ISO 8573 air quality target without wrecking your pressure drop.
Scope
Filtration We Specify & Service
Coalescing Filtration
Removes oil aerosols and fine particulates - the workhorse filter between your compressor and your dryer.
Particulate Filtration
Downstream particulate filters to protect tools, valves, and product from pipe scale and dust.
Activated Carbon
Removes oil vapor and odor for paint, food contact, and process air - specified and serviced correctly.
Oil-Water Separators
Compliant condensate handling from oil-flooded compressors so you're not dumping oil down the drain.
Automatic Drains
Timer, level, and no-loss drains that actually drain - and don't leak thousands of dollars of air per year.
Filter Housings & Sizing
Right housing, right micron, right flow - so pressure drop stays low and elements last their full life.
Process
Our Filtration Process
- Step 1
Assess
We measure differential pressure across your existing filters, review air quality targets, and see what's actually installed.
- Step 2
Specify
Coalescing, particulate, and carbon staged to hit ISO 8573 targets without over-spec'ing pressure drop.
- Step 3
Install & Service
New housings, element change-outs, drain service, and oil-water separator installation - documented.
- Step 4
Monitor
Differential pressure gauges and change intervals set so elements are replaced on wear, not on the calendar.
Air Quality Done Right
Match Filtration to What the Air Actually Touches
Over-filtered air wastes energy on every pressure drop. Under-filtered air ruins tools, valves, and product. We match the filter train to your ISO 8573 target - and to your dryer, receiver, and demand profile - so you get the air quality you need at the lowest pressure drop possible.
FAQ
Compressed Air Filtration FAQs
+How often should compressed air filters be changed?
Coalescing and particulate elements typically change annually or on differential pressure - whichever comes first. We set intervals based on your air quality target, dryer performance, and actual pressure drop measurements.
+What air quality class do I need?
It depends on what the air touches - general shop tools are ISO 8573 Class 4-6, paint and food contact are Class 2-3, breathing air and pharma are Class 1 or better. We help you match filtration to the actual requirement.
+Do you handle oil-water separators?
Yes. Condensate from oil-flooded compressors carries oil that cannot go down the drain - we install and service oil-water separators that keep you compliant and out of trouble.
+Will better filtration save me money?
Yes - two ways. Correctly specified filters cut pressure drop, which drops energy use, and they stop the contamination that ruins tools, pneumatic valves, dryers, and product.
+Do you service every filter brand?
Yes. Domnick Hunter, Parker, Ingersoll Rand, Atlas Copco, Sullair, Hankison, Zeks, Kaeser, Van Air, and more - housings and elements.
Where We Work
Filtration Service Across NC, SC & Augusta, GA
Air Quality Problems?
Call us to spec or service your filtration train. We size, install, and change elements on real differential pressure - not calendars.