Piping · NC · SC · Augusta, GA
Compressed Air Piping Installation
Steel and aluminum compressed air piping - mainlines, loops, drops, and expansions - designed for low pressure drop and sized for the plant you'll have in five years, not just today.
Scope
Piping Scope We Cover
New Mainlines & Loops
Header loops sized for real CFM demand with room to grow - the difference between a plant that hums and one that fights pressure.
Aluminum Modular Piping
Fast-install aluminum systems - clean bore, no rust, reusable fittings, easy expansion.
Steel & Galvanized Runs
Traditional steel piping where the environment or budget calls for it, installed to code and pressure-tested.
Workstation Drops & FRLs
Drops with isolation valves, filter-regulator-lubricators, quick disconnects, and hose reels sized per tool.
System Tie-Ins & Expansions
Plant expansions tied into existing headers with minimum production impact.
Leak Repair & Retrofits
Leaks and pressure-drop hotspots identified and fixed as part of a compressed air audit or standalone service.
Process
Our Piping Process
- Step 1
Design
Layout, pipe sizing, and material selection based on your actual CFM demand and pressure requirement.
- Step 2
Coordinate
Work planned around production - nights, weekends, or shutdowns - with electrical and structural trades coordinated.
- Step 3
Install & Test
Installed to code, pressure-tested, and cleaned so no debris hits your tools or dryers.
- Step 4
Document
As-built drawings and system pressure profile - so future expansions are easy to plan.
Pipe Sizing Is Energy
Undersized Piping Is a Tax You Pay Every Hour
Every 2 PSI of pressure drop across your piping costs about 1 percent of your compressor's energy bill - forever. We size mainlines and drops for real CFM demand, install with aluminum modular or steel depending on the environment, and document the as-built so future expansion is simple.
FAQ
Compressed Air Piping FAQs
+Aluminum or steel piping - which is better?
Aluminum modular systems (like Transair, Infinity, Aignep) install faster, don't rust, and hold pressure with clean bore for lower pressure drop. Steel still makes sense in some environments. We help you pick based on layout, budget, and future growth.
+Why does pipe sizing matter so much?
Every 2 PSI of pressure drop costs about 1 percent of your compressor's energy - forever. Undersized mainlines and drops are the single most common way plants waste compressed air money without knowing it.
+Can you tie new piping into a live system?
Yes. We plan shutdowns around your production, isolate what we can, and get you back online fast. Where possible we use hot-tap style connections to avoid full shutdown.
+Do you handle drops, filter-regulator-lubricators (FRLs), and hose reels?
Yes. Full workstation drops with isolation, filtration, regulation, lubrication, and connectors - specified to what each tool actually needs.
+Do you install nitrogen or high-pressure lines too?
Yes. Nitrogen generation piping and higher-pressure runs installed to code, tested, and documented.
Where We Work
Piping Installation Across NC, SC & Augusta, GA
Planning New Piping or an Expansion?
Call us before you buy pipe. Correct sizing and material selection at the design stage saves years of energy waste.