Inspection Services · NC · SC · Augusta, GA
Industrial Air Compressor Inspection Services
Documented inspections for industrial air compressors, dryers, filtration, receivers, and piping - annual condition assessments, pre-purchase inspections, insurance and OSHA documentation, ASME receiver checks, thermographic scans, and ultrasonic leak surveys.
Scope
What Our Inspection Program Covers
Annual Condition Inspection
Full compressor, dryer, filtration, receiver, drain, and piping inspection with a written report and prioritized action list.
Pre-Purchase Inspection
Buying a used rotary screw or reciprocating unit? We inspect airend, motor, cooling, controls, and run hours before the check is cut.
Insurance & OSHA Documentation
Inspection reports formatted for insurance carriers, safety auditors, and compliance reviews - so requests get answered without a scramble.
ASME Receiver Tank Checks
Visual inspection of pressure vessels, relief devices, tags, and external corrosion. Coordinated internal ASME inspection where required.
Thermographic Scans
Thermal imaging on connections, motors, and coolers to catch heat problems before they turn into failures or fires.
Ultrasonic Leak Surveys
Ultrasonic detection tags every leak in the plant with location, size estimate, and dollar cost - so repairs get prioritized by savings.
Process
How An Inspection Works
- Step 1
Scope The Inspection
We agree on the scope - annual condition, pre-purchase, insurance compliance, leak survey - and confirm what documentation you need.
- Step 2
On-Site Assessment
Our technicians work through the compressor, dryer, filtration, receiver, drains, and piping - measurements, photos, thermal scans, and ultrasonic surveys as needed.
- Step 3
Written Report
You get a documented report with condition ratings, safety items, corrective actions, cost estimates, and priorities - ready for insurance, auditors, or capex.
- Step 4
Follow-Up Repair Or PM
We quote and schedule the corrective work, and can roll the inspection into a PM program so nothing falls through the cracks.
Why It Matters
An Inspection Is What Turns Guessing Into Planning
Without documented inspections, compressor failures are surprises, insurance requests turn into fire drills, and capex requests come down to a gut feeling. A real inspection program gives you a graded condition report on every asset, a running list of corrective actions, and the paperwork that keeps insurance and safety auditors happy. It also usually pays for itself the first year in leaks found and failures avoided.
FAQ
Inspection FAQs
+What is included in an industrial air compressor inspection?
A full inspection covers the compressor (airend or heads, motor, drive, cooling, controls, safeties), the dryer and filtration train, the receiver tank, drains, condensate, and the piping run. You get a written report with condition ratings, safety items, energy findings, and recommended actions.
+How often should an industrial compressor be inspected?
At minimum once per year. Plants with critical air, insurance requirements, or continuous-duty operation should inspect twice per year, and any compressor over ten years old benefits from a formal condition assessment at least annually.
+Do you inspect air receiver tanks?
Yes. We visually inspect ASME receivers, verify pressure relief devices, check for external corrosion, and confirm inspection tags and pressure ratings match the installation. Full ASME internal inspection can be coordinated where required.
+Do you do pre-purchase inspections on used compressors?
Yes. Before you buy a used rotary screw or reciprocating unit, we inspect the airend or heads, motor, cooling, controls, and run hours, and give you an honest condition report and expected life. Do not buy a used compressor blind.
+Can inspections satisfy insurance or OSHA requests?
Our inspection reports are formatted for insurance carriers, safety auditors, and compliance reviews - documented safeties, pressure vessel checks, and corrective actions with dates. We can tailor the scope to what your carrier or auditor is asking for.
+Do you use thermal imaging or ultrasonic tools?
Yes. Thermographic scans on electrical connections, motors, and coolers identify heat problems before they fail. Ultrasonic surveys find compressed air leaks that a walk-through will miss - both are available as part of an inspection or standalone.
+How is an inspection different from PM?
An inspection is a documented condition assessment - we report what is there, what is wrong, and what to do. PM is scheduled service work - filters, fluid, drains, safeties. Most plants benefit from both, and PM programs include documented inspections at each visit.
Where We Work
Compressor Inspections Across NC, SC & Augusta, GA
Get A Documented Inspection On The Calendar
Tell us the compressors, the site, and what documentation you need. We will scope an inspection and quote it fixed-price.